Modeling Glass Starter KitThe Starter Kit contains one 3.5-ounce jar of powdered binder and one 2-ounce bottle of liquid medium, plus an instruction sheet. This kit can be mixed with glass powder to make over 3 pounds of Modeling Glass.>Modeling Glass Work turns glass powder into a moldable, sculptable material similar to clay using the two-part Modeling Glass Starter Kit. Before firing, dry Modeling Glass shapes can be sanded, carved, and otherwise modified, virtually eliminating the need for extensive cold working after firing. Both the Binder and the Liquid Medium burn away during firing, leaving pure glass behind. There is approximately a 15% shrinkage.
The mixing instructions for Modeling Glass were developed for use with Bullseye Glass powders. The ratio for mixing Modeling Glass with Spectrum/Uroboros or other powders is slightly different. INCREASE BINDER from 2 1/2 level teaspoons (6g) to 1 level tablespoon (7g). INCREASE WATER from 1/4 cup plus 2 teaspoons (60g) to 1/4 cup plus 2 1/4 teaspoons (70g).
