Pricing and Discounts
Location and Hours
> Soldering Iron Stand
Soldering Iron Stand
Additional Product Information Below
Review this item
Add to Cart
The Studio Pro Soldering Iron stand is well-balanced for stability and holds your iron securely while you are working.
The heavy steel coiled wire cage prevents the hot soldering iron from touching the work surface and protects hands and nearby objects.
Although the stand comes with a sponge, we do not recommend using a wet sponge to clean your iron. Instead using a block of Salamoniac will do a better job and re-tin your tip in the process.
Assemble the soldering iron stand by removing the nut from the base of the wire cage.
Insert the cage into the the hole located on the base of the stand behind the sponge well.
Turn the stand over and screw the nut clockwise until snug, making sure the cage is facing forward before completely tightening nut down.
Place the small rectangular tip cleaning sponge into the well located in the center of the base. Wet the sponge before use with water.
To clean soldering iron wipe tip against the wet sponge during soldering.
Excess solder can be removed by tapping the tip of the soldering iron on the metal base and allowing solder to drop into the center well.
Note: Does not fit Mika iron #5001 or Weller iron #5003.
Twofers - Jewelry bit 220 grit
Technicolor Stars Large - 96 COE
Quick Bit 1'' Rapid
Silver-plated leaf earring bails, small
Carmine -2777 -1 oz-D22891